價格：免費
更新日期：2019-05-11
檔案大小：3.3M
目前版本：2.6
版本需求：Android 2.1 以上版本
官方網站：mailto:billc@john-lewis.com
The easiest ever self build of a DCC Command station with PCB available on eBay plus only a few parts.
eBay link:
https://www.ebay.co.uk/itm/232955350950
The App formats each DCC packet for transmission via Bluetooth to Arduino Pro Mini connected to a h-bridge to form a simple DCC command station with few parts.
* Control of 1 to 20 locos
* Ideal for small to medium size layouts
* 2 Amps load drives up to 16 of OO/HO locomotives using H-bridge specified
* Add a higher current compatible h-bridge to extend load capacity
* Short circuit protected
* Automatic over current cut-out, adjustable in Arduino code
* Lights and direction
* Functions 1 to 8
* Turnout / points / accessories 8 pairs of outputs
* Custom naming of your locos
* Programming the CV1 loco address
* Add your own accessory addresses
* Change F2 and F3 from momentary to on/off switches
* Add max speed for each loco
* Choose a DC power source to suit scale used (Z/N/OO/HO/O/G) 12v to 20v
* Free software for Arduino - no restrictions on use or changes if required
* Learn from the code on how DCC commands are used
* Easy DIY circuit can be soldered on available 50 x 50 mm PCB (on sale on eBay.uk )
* App forms the DCC packets transmitted to Arduino circuit with 15 components
* Continuous DCC data flow from Android device to Arduino
* New Arduino sketch
* PCB available for purchase on eBay
Further to previous work on DCC wireless systems, I have developed a Bluetooth Command Station linked to a receiver Arduino based circuit with a HC-06 BT module and a LMD18200 H-bridge Motor driver delivering 2 Amps.
The overall cost of parts is around £20 with parts purchased from Ebay.
See Instructable:
https://www.instructables.com/id/Bluetooth-DCC-Command-Station/